2400W APS INT Series 24VDC 230V Inverter/Charger with Auto-Transfer Switching

2400W APS INT Series 24VDC 230V Inverter/Charger with Auto-Transfer Switching, Hardwired – 2400W continuous output power; 4800W peak power

Product Description

The 2400 W APS INT Series 24VDC → 230V Inverter/Charger with Auto‑Transfer Switching is a 24 V DC to 230 V AC power inverter and battery charger designed to provide reliable AC power from either a 24 V battery source or a mains AC supply. It’s built to serve as a standalone inverter, a vehicle power source, or an extended‑run UPS (Uninterruptible Power Supply) with near‑instant automatic transfer from AC to battery power during outages.

Key Specifications

⚡ Power & Output

• Continuous output power: 2400 W
• Peak surge power: 4800 W
• Output voltage: 230 V AC
• Output frequency: 50 Hz
• Waveform type: PWM (not pure sine but regulated)

🔋 Input & Charging

• DC input: 24 V (high‑current battery source required, ~112 A at full load)
• AC input: 230 V hardwired connection
• Integrated 30 A battery charger (3‑stage charging)
• Accepts external battery banks to expand runtime
• AC power can charge batteries while powering loads

🔄 Transfer & UPS Features

• Auto/Remote/Off switch enables automatic UPS mode or remote control
• Auto‑transfer switching: switches to battery inverter power on AC loss (~20 ms)
• Adjustable settings for low/high voltage transfer thresholds
• Built‑in load sensing and overload protection

📊 Indicators & Protection

• Front‑panel LEDs show load and battery status
• Built‑in fans for cooling
• Circuit breakers protect against overloads

🛠️ Physical & Environmental

• Mounting: Hardwired installation (no plug)
• Housing: Rugged polycarbonate
• Fan‑cooled with mounting feet for horizontal surfaces
• Humidity tolerance: 0–95% non‑condensing

 Key Features

⚡ Power Output: Delivers 2400 W continuous AC power and up to 4800 W peak (surge) power to handle heavy loads or startup surges.

🔄 Auto‑Transfer Switching: Includes automatic transfer switching (ATS) so the unit will switch from mains AC to battery inverter output, typically in about 20 ms, making it suitable for UPS applications with computers, communications gear, and other critical loads.

🔋 Integrated Charger: Built‑in 3‑stage 30 A battery charging system charges the connected battery bank while AC mains is available, and protects against overcharging and overdischarging.

🛠️ Installation & Built:

• Hardwired DC and AC connections — designed for permanent installation in vehicles, off‑grid sites, workshops, or emergency setups.
• Rugged polycarbonate housing with cooling fan and circuit breakers for overload protection.

📊 Status & Controls

• Front‑panel LEDs provide information on load level, battery status, fault warnings, and operating mode.
• 3‑position control switch for Auto (UPS), Charge Only, or Off modes.

Typical Use Cases

This inverter/charger is suitable for:

• Powering tools, lighting, appliances, computers, and industrial equipment from a 24 V battery bank.
• Backup power for small to medium loads (communications gear, computers, lights).
• Mobile setups (RV, emergency vehicles, fleet support).
• Off‑grid DC battery systems where AC mains may be intermittent.
• UPS configurations where near‑instant switchover is needed.

Notes

Summary

In essence, this inverter/charger is a robust DC‑to‑AC power solution that combines:

• A high‑output inverter,
• A battery charger, and
• An automatic transfer switch

…into a single integrated unit capable of delivering stable 230 V AC power from battery or mains with seamless transition during disturbances.

Notes

• Batteries are not included; you must supply a compatible 24 V battery bank.
• Installation is hardwired — professional installation is recommended due to high DC currents.
• The unit’s inverter waveform is not pure sine, which may affect very sensitive electronics.