A network communication module that plugs into compatible Shield 3-phase UPS systems to enable remote monitoring and management over Ethernet. It provides SNMP support, a web-based interface, and alarm/trap notifications, allowing administrators to monitor UPS status (voltages, load, battery health, event logs) and integrate the UPS into network management systems.
Typical Specifications (SNMP Monitoring Card for 3-Phase UPS)
-
Network interface: RJ45 Ethernet port (10/100 Mbps or 10/100/1000 Mbps) for LAN connection.
-
Protocols supported: SNMP (v1/v2c/v3), TCP/IP, HTTP/HTTPS, DHCP/BOOTP, Telnet, SSH/CLI, SMTP, Syslog, NTP (varies by model).
-
Remote management: Web browser interface, SNMP managers, and network management systems (NMS) support.
-
Event notifications: SNMP traps, email alerts, syslog messages.
-
UPS control features: Schedule UPS shutdown/startup, battery self-test, and remote UPS control (if supported by the UPS).
-
MIB support: Standard UPS MIBs (e.g., RFC1628) for integration with monitoring tools.
-
Security: Authentication and encryption features (HTTPS, SSH, RADIUS/LDAP, depending on model).
-
Environmental monitoring: Support for optional environmental sensors (temperature/humidity) on some modules.
-
Power requirements: Low-power DC input (typically 9–24 VDC or similar).
-
Operating environment: Typically 0–40 °C operating temperature and standard humidity range.
-
Physical size & weight: Compact plug-in card form factor with dimensions roughly in the tens of millimetres range; lightweight.
-
Firmware: Upgradable firmware via network or local methods (varies by product).
Reviews
There are no reviews yet.