Eaton 9E UPS, 3000 VA, 2400W, Input: C20, Output: (6) C13, (1) C19, Tower Online

Eaton 9E UPS, 3000 VA, 2400W, Input: C20, Output: (6) C13, (1) C19, Tower Online

Description Overview

The Eaton 9E 3000 VA / 2400 W UPS (9E3000I) is a high-performance online double-conversion uninterruptible power supply designed to deliver continuous, clean, and stable power for critical IT and business equipment. It protects connected devices from power interruptions, voltage fluctuations, surges, and electrical noise by constantly converting incoming power into regulated output.

Built for demanding environments such as servers, networking systems, and data centers, this UPS ensures zero transfer time during outages, meaning your equipment stays running without interruption. With a power capacity of 3000 VA (2400 W usable output), it can support multiple devices including servers, storage systems, and network infrastructure.

It features a pure sine wave output, which makes it safe for sensitive electronics and modern power supplies. The unit is equipped with IEC C13 and C19 output sockets, allowing flexible connection of both standard IT devices and higher-load equipment.

The Eaton 9E series is designed for reliability and efficiency, offering strong battery management, LCD monitoring, and consistent performance even in unstable power environments. Its tower design makes it suitable for office or server room installations where dependable backup power is essential.

Specifications 

Electrical Output

• Capacity: 3000 VA / 2400 W
• Topology: Online double-conversion UPS
• Output Voltage: 220 / 230 / 240 V (configurable)
• Output Waveform: Pure sine wave
• Output Power Factor: 0.8
• Output Frequency: 50/60 Hz auto-sensing
• Outlets:
  • 6 × IEC C13
  • 1 × IEC C19
• Voltage Regulation: ±2% output stability
• Transfer Time: 0 ms (instant switch due to online design)

Electrical Input

• Input Connection: IEC C20
• Input Voltage Range: 176–300 V (wide range operation)
• Nominal Voltage: 220/230/240 V
• Input Frequency Range: 40–70 Hz
• Power Factor: >0.99 (high efficiency input)

Battery System

• Battery Type: Sealed lead-acid
• Battery Configuration: 6 × 12V / 9Ah internal batteries
• Rechargeable & Replaceable: Yes
• Extended Battery Support: Yes (external battery modules supported)
• Battery Management:
  • Automatic self-test
  • Deep discharge protection
  • Intelligent charging system

 Performance & Efficiency

Efficiency: Up to ~91% (normal mode)

Eco Mode Efficiency: Up to ~97.5%

• Runtime:
  • ~5 minutes at full load
  • ~13+ minutes at half load (approx.)

Connectivity & Communication

• Ports: USB (HID), RS232 serial
• Expansion Slot: Yes (for network management card)
• Software Support: Eaton Intelligent Power Manager / Protector
• Network Card: Optional (not included by default)

Physical & Design

• Form Factor: Tower (free-standing)
• Weight: ~24.2 kg
• Dimensions: 19 × 39.9 × 33 cm
• Color: Black
• Display: LCD status screen
• Noise Level: <37 dB

 Environmental Limits

• Operating Temperature: 0°C to 40°C
• Humidity: 0–95% (non-condensing)
• Max Altitude: 3000 m

Key Protection Features

• Online double-conversion (zero power interruption)
• Surge and voltage fluctuation protection
• Internal bypass for maintenance continuity
• Stable frequency and voltage regulation
• Compatible with servers and sensitive IT systems

Features of Eaton 9E 3000VA / 2400W UPS 

Online Double-Conversion Technology

The Eaton 9E 3000VA uses advanced online double-conversion technology, which continuously converts incoming AC power to DC and then back to clean AC power. This process completely isolates connected devices from utility power problems such as surges, spikes, brownouts, and frequency variations. As a result, it delivers a constant, stable power supply with zero interruption, making it ideal for sensitive and mission-critical equipment like servers and networking systems.

High Power Capacity (3000VA / 2400W)

This UPS is designed to handle demanding power loads with a capacity of 3000VA and 2400 watts of usable output. It can support multiple devices at the same time, including servers, storage systems, desktop computers, and networking hardware. This makes it suitable for both small business IT setups and larger enterprise environments that require reliable backup power.

Pure Sine Wave Output

The Eaton 9E produces a pure sine wave output, which closely matches the quality of utility power. This clean power is essential for modern electronics because it ensures compatibility, improves performance, and prevents damage to sensitive components. It is especially important for devices with active power factor correction (PFC) power supplies, such as servers and high-end computers.

Wide Input Voltage Range

This UPS can operate efficiently even in unstable power environments thanks to its wide input voltage range of approximately 176V to 300V. It reduces unnecessary battery usage by stabilizing fluctuating voltage before switching to battery power. This not only improves efficiency but also extends battery lifespan by minimizing deep discharge cycles.

Flexible Output Connections

The unit is equipped with multiple output sockets, including 6 IEC C13 ports and 1 IEC C19 port. This allows users to connect a wide variety of devices, from standard office equipment like computers and routers to higher-power devices such as servers or network switches. This flexibility makes it highly adaptable to different IT setups.

Advanced Battery Management System

The Eaton 9E includes an intelligent battery management system that helps extend battery life and improve reliability. It performs automatic self-tests, prevents deep discharge, and optimizes charging cycles. This ensures that the batteries remain in good condition and are always ready to provide backup power when needed.

LCD Display Monitoring

The UPS features a clear LCD interface that provides real-time information about system status. Users can easily monitor load level, battery condition, input/output voltage, and any fault alerts. This makes system management simple and helps users quickly identify and respond to potential issues.

Quiet and Efficient Operation

Despite its high power capacity, the Eaton 9E operates with relatively low noise levels, making it suitable for office and server room environments. Its efficient internal design reduces heat generation and fan noise, ensuring smooth and quiet performance during operation.

Expandable Runtime Support

The UPS supports external battery modules, allowing users to extend backup runtime depending on their needs. This is particularly useful for environments that require longer power backup during extended outages, such as data centers or critical business operations.

🔷 Applications of Eaton 9E 3000VA / 2400W UPS

Server Rooms & Data Centers

The Eaton 9E 3000VA UPS is widely used in server rooms and data centers to ensure continuous uptime of critical IT infrastructure. It provides reliable backup power for servers, storage systems, and virtualization equipment, preventing data loss and system downtime during unexpected power failures or fluctuations.

Network Infrastructure (Routers, Switches, Firewalls)

This UPS is ideal for protecting networking equipment such as routers, switches, and firewalls. Since network systems require uninterrupted power to maintain connectivity, the Eaton 9E ensures stable operation and prevents disruptions in communication and internet services.

Business Workstations & Offices

In office environments, the UPS supports desktop computers, printers, and other essential business equipment. It helps employees continue working during power outages and protects important documents and systems from sudden shutdowns or data corruption.

CCTV and Security Systems

The Eaton 9E is commonly used in security installations to keep CCTV cameras, DVRs, and monitoring systems running without interruption. This ensures continuous surveillance and security coverage even during blackouts.

Medical and Healthcare Equipment

In healthcare settings, the UPS can support sensitive medical and diagnostic equipment that requires stable and clean power. It helps maintain operation during power disturbances, which is critical for patient safety and accurate results.

Industrial and Commercial Applications

The UPS is also suitable for industrial environments where machines, control systems, and automation equipment need stable power. It helps reduce downtime, protect sensitive electronics, and maintain smooth production processes.

Educational Institutions & Labs

Schools, universities, and computer labs use this UPS to protect computers, servers, and learning systems. It ensures uninterrupted learning activities and safeguards digital resources during power interruptions.

Retail and Point-of-Sale (POS) Systems

In retail environments, the UPS supports POS systems, billing machines, and inventory systems. It prevents transaction failures and data loss during outages, ensuring smooth customer service operations.