Specifications

1. General

• Model: SMX2200XLRT2U
• UPS Type: Line‑Interactive with AVR (Automatic Voltage Regulation)
• Form Factor: 2U Rackmount / Convertible to Tower
• Power Capacity: 2200 VA / 1920 W (nominal)
• Power Factor: ~0.87 – 0.9
• Efficiency (Line Mode): ~98 %

 2. Electrical Input

• Nominal Input Voltage: 230 V AC
• Input Connection: IEC‑320 C20 inlet
• Maximum Input Current: ~10.7 A
• Input Frequency: 50 / 60 Hz auto‑select

3. Output

• Output Voltage: 220 V, 230 V, or 240 V nominals supported
• Output Waveform:
  • AC Line Mode: Sine wave
  • Battery Mode: Pure sine wave
• Output Regulation:
  • Line mode: −15 % / +6 % (typical)
  • Battery mode: ±5 %
• Output Outlets: 8 × IEC‑320 C13
• Load Banks: 2 independently switchable load banks for selective reboot or shedding

4. Battery & Runtime

• Battery Type: VRLA (Valve Regulated Lead Acid)
• Runtime:
  • ~11.9 minutes at half load (≈960 W)
  • ~5 minutes at full load (1920 W)
• Recharge Time: Typically < 4.5 hours (10 % → 90 %)
• Battery Replaceable: Hot‑swappable internal battery packs
• External Battery Support:
  • Optional external packs: BP48V24‑2U, BP48V60RT‑3U, BP48V27‑2US

 5. Communications & Control

• Ports:
  • USB (HID‑compliant)
  • DB9 Serial
  • EPO (Emergency Power Off)
  • Slot for optional SNMP/Network management card
• Monitoring: Front LCD interface shows status, load, battery, alarms, configuration
• Software: PowerAlert UPS management software supported via USB/serial

 6. Physical & Environmental

• Rack Height: 2U (19″ rack compatible)
• Installation Hardware: Includes 4‑post rackmount kit
• LED/LCD Display: Rotatable LCD panel for rack or tower view
• Audible Alarm: Power status and fault alarms with mute/silent mode options

7. Protection Features

• AVR: Corrects brownouts and overvoltages back to usable levels without consuming battery power
• Surge & Line Noise Filtering: EMC/EMI protection
• Cold‑Start Supported: Can start from battery without mains

8. Certifications & Compliance

• Safety/Standards: CE, IEC 62040‑1, IEC 62040‑2 Class A, GOST (varies by region)

Features

1. Line-Interactive Topology with AVR – The UPS continuously regulates incoming voltage, automatically correcting brownouts and overvoltages without using battery power, which helps extend battery life.
2. Pure Sine Wave Output – It delivers clean, stable sine-wave power during battery operation, ensuring full compatibility with sensitive servers, networking devices, and telecom equipment.
3. 2U Rack/Tower Convertible Form Factor – The UPS is designed to fit into a standard 19-inch rack while also being convertible to tower mode for flexible installation in offices or server rooms.
4. High Capacity (2200 VA / 1920 W) – It provides enough power to support multiple critical devices simultaneously, making it suitable for small to medium IT infrastructure.
5. Front Panel LCD Display – The intuitive LCD screen provides real-time information about input and output voltage, load percentage, battery status, and operating mode, allowing easy monitoring and management.
6. Hot-Swappable Batteries – Internal battery packs can be replaced without shutting down connected equipment, ensuring continuous operation and minimal downtime.
7. Optional External Battery Support – The UPS can connect to external battery packs to extend runtime, enabling protection during prolonged power outages.
8. Eight IEC C13 Outlets with Load Banks – Outlets are divided into two independently controllable banks, allowing selective reboot or shutdown of non-critical devices to prioritize power for essential systems.
9. USB and DB9 Communication Ports – These ports allow local UPS management and monitoring via software, enabling safe shutdown, battery monitoring, and event logging.
10. Optional Network Management Card Slot – Adding a network card enables SNMP/web-based remote monitoring, control, and alerts for IT administrators managing multiple UPS units.
11. Fast Automatic Transfer to Battery – In the event of a blackout or voltage fluctuation, the UPS transfers to battery in milliseconds, preventing interruptions to connected equipment.
12. Audible Alarms and Notifications – The UPS provides alerts for power events, low battery, overloads, and faults, with options to silence alarms while still receiving visual indicators.
13. Surge Suppression and Line Noise Filtering – It protects connected devices from voltage spikes, surges, and electromagnetic interference, reducing the risk of equipment damage.
14. Cold-Start Capability – The UPS can power on from battery even when mains power is absent, allowing critical equipment to start during a complete blackout.
15. Energy Efficient Design – With ~98% efficiency in line mode, the UPS minimizes energy losses and reduces operational costs while maintaining reliable protection.

Applications

1. Server Protection – Ideal for safeguarding small to medium rack or tower servers from power interruptions, voltage fluctuations, and outages.
2. Networking Equipment – Ensures uninterrupted operation of switches, routers, firewalls, and network appliances, preventing downtime and data loss.
3. Telecommunications Systems – Provides reliable backup for VoIP systems, PBX phones, and communication hubs, maintaining connectivity during power disturbances.
4. Data Centers & Server Rooms – Supports critical IT infrastructure in small data centers or dedicated server rooms, especially where extended runtime and monitoring are required.
5. Point-of-Sale (POS) Systems – Keeps retail POS systems, barcode scanners, and cash registers running during short outages or brownouts.
6. Medical Equipment (Non-Life-Support) – Protects sensitive diagnostic and laboratory devices that require stable power without interruption.
7. Workstations & Office Equipment – Safeguards desktops, PCs, monitors, and other essential office devices against sudden power loss and surges.
8. Industrial Control Systems – Provides power backup for light industrial automation controllers, sensors, and control panels to prevent production interruptions.
9. Home Lab & IT Enthusiasts – Suitable for home server setups, NAS storage, or test labs where reliable power continuity is important.
10. Remote or Critical Sites – Perfect for environments where mains power is unstable or intermittent, ensuring critical operations continue smoothly.