APC Back-UPS BK325I

Model: APC Back-UPS BK325I
Type: Standby UPS (battery backup + surge protection)
Capacity: 325 VA / ~210 W
Input Voltage: 230 V AC
Outlets: 4 IEC (battery + surge protection)
Battery: Sealed lead-acid
Use Case: Protects routers, modems, and small PCs during short power outages
Purpose: Allows safe shutdown and shields equipment from voltage spikes

Categories: APC Backups, Power Backups

Description
Reviews (0)

APC BK325I Back-UPS CS 325VA/195W 230V Offline UPS, w/o Shutdown Software

Description

APC Back-UPS BK325I is a compact uninterruptible power supply (UPS) that provides battery backup and surge protection for small electronics like routers, modems, and desktops during power interruptions. It has a 325 VA / ~210 W capacity, multiple IEC outlets, and a sealed lead-acid battery to keep devices running briefly when mains power fails.

Back-UPS Features & Benefits

Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

LED status display: Quickly understand unit and power status with visual indicators.

Audible alarms: Provides notification of changing utility power and UPS power conditions

Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.

Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Technical Specs

Max Configurable Power (Watts): 210Watts / 350VA

Output Frequency (sync to mains): 47 – 63 Hz

Output Frequency (not synced): 50/60 Hz +/-1 Hz

Topology: Standby

Waveform type: Stepped approximation to a sinewave

Transfer Time: 6ms typical : 10ms maximum

Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)

Input voltage range for main operations: 180 – 266V

Number of Power Cords: 1

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof

Typical recharge time: 6hour(s)

Replacement Battery

Expected Battery Life (years): 4 – 6

RBC Quantity: 1

Battery Volt-Amp-Hour Capacity: 86

Runtime

View Runtime Graph

View Runtime Chart

Efficiency

View Efficiency Graph

Control panel

LED status display with On Line : On Battery : Replace Battery and Overload indicators

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge energy rating

310Joules

Filtering

Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449

Maximum Height

165MM, 16.5CM

Maximum Width

91MM, 9.1CM

Maximum Depth

284MM, 28.4CM

Net Weight

5.73KG

Shipping weight

6.73KG

Shipping Height

178MM, 17.8CM

Shipping Width

241MM, 24.1CM

Shipping Depth

368MM, 36.8CM

Color

Beige

Master Carton Units

2.0

Units per Pallet

48.0

Operating Temperature

0 – 40 °C

Operating Relative Humidity

0 – 95 %

Operating Elevation

0-3000meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95 %

Storage Elevation

0-15000meters

Online thermal dissipation

19.0BTU/hr

Reviews

There are no reviews yet.

Be the first to review “APC Back-UPS BK325I” Cancel reply